MYCROPRIME – CIAW6557

MYCROPRIME – CIAW6557 is an acrylic-based primer before waterproofing is essential for ensuring a long-lasting, effective waterproofing system. It enhances adhesion, seals pore, improves durability, and prevents moisture-related issues. Whether for roofs, walls, basements, or wet areas, priming is a key step that should not be skipped

Technical Information: 50±2 % solid product

Features & Advantages

• ➢ Prevents peeling, flaking, or detachment
• ➢ Fills small pores & cracks in concrete.
• ➢ Prevents moisture and reduce the efflorescence and mold growth.
• ➢ Compatible with all kind of cementitious waterproofing system
• ➢ Protects against alkali reactions
• ➢ Resists exposure to chemicals, salts, and environmental pollutants.
• ➢ Prevent the UV degradation
• ➢ Extending the lifespan of the waterproofing system.

Applications

• ➢ Clean the Surface
• ➢ Repair Cracks and Holes
• ➢ Ensure a Dry Surface
• ➢ Check for Efflorescence (Dust)

Package: 1L, 5L, 10L and 20 L

MYCROCORE – CIA630

MYCROCORE CIA630 is an acrylic modified elastomeric waterproofing system for exterior horizontal & vertical surface. It is 1K acrylic based liquid membrane, ease in application directly apply with brush/roller. It has excellent properties to withstand pressure up to 3 bars on vertical surface & 5 bars of positive waterproofing pressure on horizontal surface

Features & Advantages

• ➢ Prevents peeling, flaking, or detachment
• ➢ Fills small pores & cracks in concrete.
• ➢ Prevents moisture and reduce the efflorescence and mold growth.
• ➢ Compatible with all kind of cementitious waterproofing system
• ➢ Protects against alkali reactions
• ➢ Resists exposure to chemicals, salts, and environmental pollutants.
• ➢ Prevent the UV degradation
• ➢ Extending the lifespan of the waterproofing system.

Applications

• ➢ Cleaning and surface preparation: Clean all the surface to the sound base which is to be treated with MYCROCORE CIA630 advanced. Remove dust, oil, laitance any other chemicals oil etc.
• ➢ Crack filling: Fill the cracks if present on the substrate with MYCROSEAL Exterior properly.
• ➢ Mix MYCROSIL+ with water in 1:20 and spray over the surface & allowed to dry for 3 hrs.
• ➢ Mycroprime: Priming of the substrate must be done with MYCROPRIME because priming the surface before waterproofing will provide better adhesion to the substrate and increase durability of waterproofing system.

Package: 1L, 5L, 10L and 20 L

MYCROEM – CIAW7770

MYCRO-EM – CIAW7770 is a two-component acrylic polymer modified elastomeric waterproofing membrane which consists of MYCRO - EM powder and PU - acrylic emulsion. MYCRO - EM powder consists of specially selected cements, graded hardwearing aggregates and additives supplied in powder.

Features & Advantages

• ➢ Minimum surface preparation needed
• ➢ Applied directly to the damp concrete and masonry
• ➢ Excellent adhesion
• ➢ Non-toxic-ideal for potable water tanks
• ➢ Excellent for damp-proofing basements
• ➢ Excellent for concrete roof, leaking brick and masonry walls
• ➢ Supports Structural Integrity
• ➢ Prevent the UV degradation
• ➢ Extending the lifespan of the waterproofing system.

Applications

• ➢ Cleaning and surface preparation: Clean all the surface to the sound base which is to be treated with MYCROEM advanced. Remove dust, oil, laitance any other chemicals oil etc.
• ➢ Crack filling: Fill the cracks if present on the substrate with MYCROSEAL Exterior properly.
• ➢ Mix MYCROSIL+ with water in 1:20 and spray over the surface & allowed to dry for 3 hrs.
• ➢ Mycroprime: Priming of the substrate must be done with MYCROPAC because priming the surface before waterproofing will provide better adhesion to the substrate and increase durability of waterproofing system.

Package: 1L, 5L, 10L and 20 L

MYCROPAC PRIME

MYCROPAC PRIME a polyurethane-acrylic-based primer combines the benefits of both polyurethane and acrylic, making it an excellent choice for waterproofing applications. It enhances adhesion, seals porous surfaces, and provides long-term protection against water damage.

Features & Advantages

• ➢ Superior Adhesion
• ➢ High Water Resistance
• ➢ Flexible and Crack-Resistant
• ➢ Fast Drying and Curing
• ➢ Improves Durability & Breathability
• ➢ Chemical and UV Resistance
• ➢ Seals Porous Surfaces
• ➢ Supports Structural Integrity
• ➢ Protects against alkali reactions
• ➢ Resists exposure to chemicals, salts, and environmental pollutants.
• ➢ Extending the lifespan of the waterproofing system.

Applications

• ➢ Clean the Surface
• ➢ Repair Cracks and Holes
• ➢ Check for Efflorescence
• ➢ Ensure a Dry Surface
• ➢ Check for Efflorescence

Package: 1L, 5L, 10L and 20 L

MYCROREFLECTS

MYCROREFLECTS (TOP COAT) is an elastomeric single compound acrylic base UV protected waterproof coating. It contains brilliant white pigments and heat reflective ceramic spheres which gives the product heat reflective and insulating properties. It protects the substrate by reflecting up to 90% of the incident solar heat from the surface.

Features & Advantages

• ➢ Fast, easy and safe application
• ➢ Heat reflective and insulating properties
• ➢ Reflects Ultra-Violet (light) rays
• ➢ Allows surface to breath while remaining strongly anchored to the substrate
• ➢ Highly elastic and crack-bridging
• ➢ Provides a seamless coating
• ➢ High flexibility and fast drying
• ➢ Non-toxic and VOC compliant water-based coating
• ➢ Reduces energy costs (for cooling) by up to 40%
• ➢ Lower risk of roof failure even in cold climate and longer life expectancy

Applications

• ➢ Apply one coat of MYCROREFLECTS using roller or spray and let it dry overnight.
• ➢ On the corners, and joints and around pipes, apply one more coat of MYCROREFLECTS and embed a layer of MYCROFIBER reinforcement mesh (should be embedded when the MYCROREFLECTS layer is wet). Allow it to dry overnight.
• ➢ Apply the second coat of MYCROREFLECTS as final coat, perpendicular to the first coat, applying each coat at right angles to each other. Allow it to dry overnight.
• ➢ Ensure that application operation is continuous to avoid dry edges.

Package: 1L, 5L, 10L and 20 L

MYCROEMPU

MYCROEMPU CIA630 is a single-component, liquid applied, elastomeric polyurethane coating for waterproofing of concrete surfaces. MYCROEMPU provides excellent resistance to moisture, water, and salts penetration into concrete and masonry surfaces.

Features & Advantages

• ➢ Liquid applied membrane can be applied with roller, brush or spray.
• ➢ Non-toxic, Provides a seamless coating.
• ➢ Flexible, has crack bridging ability.
• ➢ High bond strength to a variety of substrates and building materials.
• ➢ Resists positive water pressure.
• ➢ Resistant to chemicals.
• ➢ Excellent resistance to humidity and temperature.
• ➢ Excellent resistance to Chlorides and Alkalies
• ➢ Very high tensile strength.
• ➢ UV stable.

Applications

• ➢ Surface Preparation: Surface need to be cleaned by wire brushing followed by vacuum cleaning so that surface is free of any loose particles, dust, laitance, mould release agents and curing compounds. All cracks to be treated with MYCROSEAL – EXT modified mortar. Surface is allowed to self-cure for 24 hours. Ensure the moisture content of the surface is below 5% before Priming.
• ➢ Fillet preparation: Horizontal and vertical angle joints need to be prepared with 50x50 mm concave fillet using concrete admixed with MYCROPROOF – AW+.

Package: 1L, 5L, 10L and 20 L

MYCROGUARD RCC

MYCROGUARD RCC Tank is a two-component coating for the moisture & dam proofing treatments of water tanks with anti-microbial anti-fungal properties. It has excellent water resistance, adhesion to concrete surface, has good hardness and sets faster.

Features & Advantages

• ➢ Minimum surface preparation needed
• ➢ Excellent adhesion.
• ➢ Bonds directly to porous and non- porous surfaces
• ➢ Waterproof and non-toxic-Ideal for potable water tanks
• ➢ Excellent for damp-proofing basements below ground
• ➢ Breathable-Allows transmission of water vapour from interior of building
• ➢ High resistance to carbon dioxide and chloride ion diffusion
• ➢ Can fill the honeycombs, dot surfaces and concrete with potholes

Applications

• ➢ Preparation: All the surfaces which are to receive MYCROGUARD - RCC, must be free from oil, grease, wax, dirt or any other form of foreign matter which might affect adhesion. Spalled and deeply disintegrated concrete should be removed to sound concrete and repaired with Renderoc System.
• ➢ Mixing MYCROGUARD - RCC liquid is poured into a plastic or metal drum. To this, an equal volume of clean fresh water is added, for brush application consistency. Then mixing is started with a slow speed drill (350-450 rpm). The powder component is added gradually to the liquid avoiding lump formation and mixed for 2-4 minutes.

Package: 7.5 kg powder + 5 kg polymer pack

MYCROSHIELD – TEX

MYCROSHIELD – TEX is a waterproofing coating for exterior horizontal surfaces like terraces, chajjas and also a waterproofing basecoat for Paints Exterior Emulsion coatings for vertical walls.

HIGH PERFORMANCE ACRYLIC BASED WATERPROOFING BASE COAT FOR PAINTS

Features & Advantages

• ➢ Waterproofing protection of up to 3 bars of positive hydrostatic pressure
• ➢ Unmatched crack bridging ability due to elastomeric properties
• ➢ High sheen, brilliant white colour and thick coat results in high levels of heat reflectance
• ➢ Strong adhesion to masonry substrates
• ➢ Provides surface temperature reduction up to 10°C
• ➢ This property is applicable for terraces

Applications

• ➢ Step 1: Follow the standard cleaning and crack filling procedure and then do the priming with MYCROPRIME – CIAW6557 advanced brush
• ➢ Step 2: Apply one brush coats of mixed MYCROSHIELD – TEX at an interval of 6 to 8 hours.
• ➢ Step 3: In case of persistent dampness problem, apply second coat waterproofing MYCROSHIELD – TEX advanced brush/roller
• ➢ Allow it to dry for minimum 24 hours before proceeding for painting

Package: 30, 50, 100 and 220 Kg

MYCROROOF – RAIN SHIELD

MYCROROOF - RAIN SHIELD is a fiber reinforced elastomeric liquid applied waterproofing membrane. It is formulated with select elastomeric and resilient acrylic polymers and reinforcing synthetic fibers. Upon curing, it forms a thick, seamless, durable membrane thus offering ultimate waterproofing.

Features & Advantages

• ➢ Waterproofing protection of up to 7 bars of positive hydrostatic pressure
• ➢ Unmatched crack bridging ability due to elastomeric properties
• ➢ High sheen, brilliant white colour and thick coat results in high levels of heat reflectance ❖ Strong adhesion to masonry substrates
• ➢ Anti carbonation
• ➢ Reinforced with synthetic fibers for superior abrasion resistance
• ➢ Provides surface temperature reduction up to 10°C
• ➢ This property is applicable for terraces

Applications

• ➢ New masonry surfaces must be allowed to cure completely. It is recommended to allow 28 days as the curing time for new masonry surfaces. The roof must have a positive slope/ drainage system to avoid water ponding at places.
• ➢ Surface should be free from any loose paint, dust or grease. Remove all existing bitumen coatings completely. It is recommended to use Intense wire brushing, High speed water jet and a vacuum cleaner for thorough cleaning of the surface to avoid "Peeling off" problems.

Package: 1L, 4L, 10L and 20 L

MYCROEPDM – PRIMER

MYCROEPDM Primer is a single component, solvent based, synthetic rubber primer designed to deliver enhanced adhesion to EPDM rubber substrates.

Features & Advantages

• ➢ 1- part easy and ready to use
• ➢ Enhances adhesion to new and aged EPDM membranes
• ➢ No VOC’s & No Harmful Odors
• ➢ Water Based
• ➢ Flexible When Cured
• ➢ Cleans Up with Soap & Water
• ➢ Non-Flammable
• ➢ Fast curing - overcoating possible after 2 hours

Applications

• ➢ The existing membrane must have sufficient adhesion to the roof. The surfaces must be clean, dry, free of stripping agents, oil, grease, silanes, salts, silicone, siloxanes and other chemicals which could cause poor adhesion.
• ➢ All surfaces to be coated must be thoroughly cleaned by conventional methods. For confirmation of adequate preparation carry out a pre-trial.
• ➢ MYCROEPDM Primer is applied either by brush, roller, or airless spray application. This primer will require one generous coat with the goal of maximizing adhesion

Package: 1L, 4L, 10L and 20 L

MYCROEPDM – TOP COAT

MYCROEP-COAT is a unique rubber coating that provides extremely effective protection, reducing costly re-applications. It is a one-component product that has excellent adhesion to properly prepared surfaces. It controls corrosion and rust bleed through, even after years of service. It is thermally stable and resists cracking and peeling due to weather extremes and ultraviolet exposure.

Features & Advantages

• ➢ Stops all leaks, even with standing water
• ➢ Excellent Resistant UV & Ozone for exposed
terraces and roofs
• ➢ Highly Flexible
• ➢ Seamless Application
• ➢ Long Lifespan
• ➢ Chemical Resistant
• ➢ Low VOC

Applications

• ➢ Surface preparation: The surface must be free of any oils, moisture, rust scale, soil or other contaminates that may interfere with good adhesion. Remove any loose material from seams or other surfaces with a wire brush or scraper. Oil and grease should also be removed with solvents or an appropriate detergent cleaner. In many cases high pressure water blast will be sufficient to prepare the surface.
• ➢ Application temperatures: For best results, the temperature of the ambient air and the substrate should be within a range of 15 -35 0C. For best spray application, the product should be at a minimum of 15 0C. Lower temperatures can be utilized for brush applications.
• ➢ Application methods: MYCROEP-COAT can be applied by brush, spray or roller. Best results can be obtained with airless spray equipment.

Package: 10 Kg and 20 Kg