About Us
Contact Info
-
-
Phone
+91 9816632049 -
MYCROPROOF – IWP2 is specially formulated integral liquid waterproofing cum water reducing compound of surface-active plasticizing agents, various polymers & additives. It is used as an additive for cement concrete, mortar & plasters. It makes concrete cohesive and prevents segregation.
Technical Information: 250 ml per 50 kg bag of Cement
Package: 500 ml, 1 L, 5 L, 10 L and 20 L
Mycroproof AWP is specially formulated as an integral waterproofing compound contains surface active plasticising agents, polymers, surfactant & hydrophobic additives. Integral liquid waterproofing compounds are used in construction to enhance the water resistance of concrete and masonry structures.
Technical Information: 200 ml per 50 kg bag of Cement
Package: 500 ml, 1 L, 5 L, 10 L and 20 L
Mycroblock 100 is a brown liquid concrete accelerator that is based on chloride. It disperses agglomerated cement particles, which speeds up hydration and improves the performance of the water content in cementitious mixes. This allows for constant workability water decrease, which further increases strength. where steel is pre-stressed or implanted.
Technical Information: Dosage as a guideline 0.6 to 2% of the cement's weight in volume
Package: 500 ml, 1 L, 5 L, 10 L and 20 L
Mycroblock 200 is based on is based on PCE concrete accelerator and comes in a light-yellow liquid form. Its addition to cementitious mixtures disperses agglomerated cement particles, speeding up hydration and improving the performance of the water content. This facilitates water reduction to be achieved while working continuously, thereby enhancing strength.
Technical Information: Dosage as a guideline 0.6 to 2 % of the cement's weight in volume
Package: 500 ml, 1 L, 5 L, 10 L and 20 L
MYCROBLOCK- FN is an accelerating admixture which is made without chloride and is based on a blend of nitrite and format salts. It comes as a straw-coloured solution that dissolves in water right away. By quickening the early phases of cement hydration, Mycroblock FN causes a quicker stiffening and enables strength increase to start earlier. This impact is most prominent within the first 24 hours following mixing and is especially visible at low temperatures.
Technical Information: Dosage as a guideline 0.6 to 1.5% of the cement's weight in volume
Package: 500 ml, 1 L, 5 L, 10 L and 20 L
MYCROCON –R is a concrete retarder free of chlorides that might postpone the concrete's setting time. There is no negative impact on the concrete's subsequent stiffening and strength gain from the delayed initial hydration of the cement, which causes a delay in the concrete's setting time.
Technical Information: Dosage as a guideline 0.6 to 1.5% of the cement's weight in volume
Package: 500 ml, 1 L, 5 L, 10 L, 20 L and 220L
MYCROWR – CF5 is a chlorine-free water lowering admixture based on specific sugar reduced lignosulphates. It comes in a dark brown solution that dissolves in water right away. It improves the fluidity of the concrete and helps the water content of the mixture work more efficiently by dispersing the fine particles. As a result, advantages like water reduction and enhanced strengths can be realized. This also results in higher levels of workability for the same water content.
Technical Information: Dosage as a guideline 0.6 to 2% of the cement's weight in volume ratio.
Package: 1 L, 5 L, 10 L, 20 L and 220L
MYCROWR – LS10 is a chlorine-free water lowering admixture based on specific sugar reduced lignosulphates. It comes in a dark brown solution that dissolves in water right away. It improves the fluidity of the concrete and helps the water content of the mixture work more efficiently by dispersing the fine particles. As a result, advantages like water reduction and enhanced strengths can be realized. This also results in higher levels of workability for the same water content.
Technical Information: Dosage as a guideline 0.6 to 1.2% of the cement's weight in volume ratio.
Package: 1 L, 5 L, 10 L, 20 L and 220L
MYCROWR NP20 is a Melamine Formaldehyde Sulfonates (MFS) / Naphthalene Sulfonate Condensates (NSC) based water reducer admixture and supplied as a brown liquid instantly dispersible in water. This generally improves cement dispersion. At the start of the mixing process an electrostatic dispersion occurs due to which cement particle's capacity to separate and disperse increases. This mechanism considerably reduces the water demand in flow able concrete.
Technical Information: Dosage as a guideline 0.4% to 1.0% of the cement's weight in volume ratio.
Package: 1 L, 5 L, 10 L, 20 L and 220L
MYCROWR – PC30 is a Polycarboxylate Ether (PCE) based water reducer admixture and supplied as a brown liquid instantly dispersible in water. This generally improves cement dispersion. At the start of the mixing process an electrostatic dispersion occurs due to which cement particle's capacity to separate and disperse increases. This mechanism considerably reduces the water demand in flow able concrete.
Technical Information: Dosage as a guideline 0.4% to 1.0% of the cement's weight in volume ratio.
Package: 1 L, 5 L, 10 L, 20 L and 220L
MYCROCON FLUDIFIER is a critical chemical admixture employed in concrete formulations to enhance workability, flowability, and strength. These substances reduce the water content required for achieving the desired consistency in concrete mixtures by 15-20%, without altering the overall composition of the mix. This reduction in water not only facilitates easier handling and placement of concrete but also leads to improved density and mechanical properties of the final product.
Technical Information: Dosage as a general volume ratio of 0.4 to 2 % of the cement's weight.
Package: 1 L, 5 L, 10 L, 20 L and 220L
MYCROCON – AIR is a chloride free air entraining admixture based on neutralized Vinson resin. Micro-con AIR acts at the interface between the mixing water and cement/aggregate particles to produce microscopic air bubbles, which are evenly distributed throughout the concrete. The entrained air enhances durability by providing protection. Against the rapid temperature changes found in freezing and thawing conditions and with the use of de-icing salts.
Technical Information: Dosage as a general volume ratio of 5% ± 1.5% of the cement's weight.
Package: 1 L, 5 L, 10 L, 20 L and 220L
MYCROQUICK FILL is supplied as a ready-to-use dry powder, requiring only the addition of water to produce a free-flowing non-shrink grout. The material is a blend of specially processed cement, pre graded fillers and additives which impart high early and final strengths due to very low water requirement Controlled expansion to retain the original volume filled even after setting free flow characteristics without any segregation and bleeding.
Package: 10 & 20 Kg
MYCROREMOVER is a combination of acid-based material, corrosion inhibitors, dispersing agents and is supplied as a clear green solution.
Package: 500 ml, 1L. 5L, 10L and 20L
MYCROGEL is a high-performance polymer-modified cementitious repair mortar designed for structural and non-structural repair of damaged concrete. The formulation combines high-grade cement, graded quartz aggregates, silica fume, polymer modifiers, and special additives to produce a dense, high-strength repair mortar with excellent adhesion to concrete substrates. MYCROGEL is specially engineered for repairing spalled concrete, honeycombs, cracks, and deteriorated structural members. The advanced polymer technology improves bond strength, flexibility, and durability, while silica fume enhances compressive strength and impermeability. The product is ideal for infrastructure, industrial, and civil construction repairs where durable and long-lasting concrete restoration is required.
Package: 10 & 20 Kg
MYCROWAX is a high-efficiency wax-based concrete curing compound formulated to protect freshly placed concrete by forming a continuous moisture-retaining membrane on the surface. The product is based on refined paraffin and microcrystalline wax emulsion technology, designed to significantly reduce water evaporation during the early curing period. By maintaining adequate moisture in the concrete, MYCROWAX promotes proper cement hydration, leading to improved strength development, surface hardness, and durability while minimizing shrinkage cracks. The product is specially designed for large concrete areas where conventional water curing is difficult or impractical, making it ideal for infrastructure and industrial construction.
Package: 500 ml, 1L. 5L, 10L and 20L
